You’ve bought a new banner sign to promote your event or business and you are thinking about the best method to hang it. The hanging of a banner shouldn’t be an issue. Here’s an overview of the most common locations that heras fence banners can be hung and the most effective methods and strategies to hang banners:
- Flat Wall Mounting
The majority of banners are purchased with grommets along the perimeter making them simple to put up in flat wall surfaces. For Drywall you can push pins to push through the material, or through grommet openings or plastic wall anchors that come with washers and screws to fixate through the grommets, and then in the wall.
It is important to ensure that your washer’s diameter is bigger than the opening for grommets. If you want to build brick or block walls you can use tapcon masonry screws with washers to secure to your wall banner (note that you’ll require a hammer drill as well as a masonry bit to use this technique).
- Between Pole Mounting –
If you are mounting heras banners on poles, it is recommended to use rope or webbing that has D-rings sewn to the bottom and top edges of your banner. Then, you can attach the rope to the poles or via large eye screws that can be positioned at the top of the poles.
Placing banners between poles with ropes that are attached to grommets in the corners is typically an unwise choice since the grommets tend to break loose in the first blowing wind. Bungee cords can be affixed to the grommets in the corner and reduce the risk of the grommets being ripped out.
- Fence Mounting
The installation of heras fencing banners on the chain link fences is typically an easy job. Use wire ties made of plastic or zip ties through grommets, and then wrap them around the chain links. If you are building a fence with wood, follow the same process similar to that for the flat wall of a wood.
- Ceiling Mounting –
The most effective method to hang banners from the ceiling over the stage, gym or auditorium is by using pole pockets. Pole pockets are holes that are sewn into sides and tops of banners, which let a sturdy PVC or metal pole slide through the pockets.
Cable, wire or decorative rope could be then affixed to the pole at the top and then hung from the rafters that are above. The pole is then put into the pocket below to provide some weight to the banner , keeping it firmly fixed and stable.
Installation of Flags to Poles Flag Mounting to Poles
Pole pockets can also be used for mounting vertical banners along the edges of electrical poles as well as light poles. Sometimes referred to as scaffold banners, these are frequently seen on cities, college or business campuses. Banner bracket kits featuring projecting rods of fibreglass or steel are positioned on poles to enable the hanging of banners.
1) Over the Street Mounting –
Large banners for parades and other events are often erected on the entire street. These are usually hung using the wire of a guy strung above and beneath the banner, then fixed to poles that are on the opposite end of the road.
A snap hook is then put through the grommets, and then around the wires in order to hang the banner. Rope is then attached to the corner grommets on the banner and pulled tightly around each pole in order to keep the banner in the correct position.
2) Storefront Windows –
Banners designed to fit inside storefront frames can be attached on the outside of the window with suction cups that have hooks. Hooks are simply put in the grommet holes, and after that, the suction cups get stowed on the glass.
Although this list may not be able to cover all possible situations for mounting banners but it should cover the majority possible scenarios. Perhaps a combination of the methods for mounting banners and methods mentioned above might be useful in certain instances. It is now clear how to hang an ad.
Outdoor Banner Ideas For An Impressive Display
Display stands and outdoor banners are the mainstays of advertising during outdoor shows and sports events. Compare them to other traditional options for advertising, and you’ll understand why banners are an effective marketing strategy at affordable prices.
Outdoor displays should consist of:
I.e. robust, solid and have the capacity to withstand any elements and not break, splitting or discoloration.
I: Lightweight, compact and easy to set up and take down.
II: Visually appealing and attractive to draw attention when travelling for far distances.
You can also contribute to help the environment by making sure you purchase sturdy banners made of recyclable materials such as Polyester fabric, instead of PVC banners.
Apart from being environmentally friendly Polyester fabric also has additional advantages. Non-woven or knitted polyester fabrics are the best choices. Knitted fabrics are light and are able to handle wind better as it allows wind to flow through. Non-woven polyester is durable and more durable.
After you’ve settled on the essentials there are a lot of choices when it comes down with outdoor display ideas. Here are a few of the most sought-after displays for outdoor use:
1: A-Frame
An A-Frame is an A-frame that can collapse those two banners that are placed in the same manner as the A-letter. They are available in diverse designs and sizes. They are great for displays with directional elements as well as trade shows, sporting events and other promotions.
The fact that they are lightweight makes them secure to use on the edges of sports fields. They aren’t injured or damaged in the event that someone bumps through them.
- Flying Banners
Flying banners are a simple display which uses a banner that is hung on the stem. They can be erected with stakes attached to soft ground snow, grass, or snow.
They can be mounted using stands that are placed on hard flat surfaces. You can also choose double-sided banners that look identical from both sides. The banners can be changed which allows you to utilise the same display equipment for various events.
Their design lets them remain stable and solid when it rains or winds. They are perfect to use for branding on the outside of sports or charity events.
- Wing Banners
It is possible to harness the power of wind to boost your advertising by using these unique display ideas. They’re similar to flying banners. The major difference is that they are mounted equipped with a rotating mechanism which lets the display alter direction in response to winds while remaining strong.
- Feather Banners
They’re like wing banners however they are in a flag-shaped design. These can be utilised as a single item or in a set to promote outdoor advertising.
- Circular Banner
If you’re looking to put an advertisement on the streets or at the entrance of an outlet for an extended duration, this banner is the ideal option. The banner is placed on circular frames. The disc-shaped display can be then hung from the wall or to a pole by using brackets.
Fence wraps can be described as banners designed to be hung on barriers and fences. They can draw the attention of a gathering from the street, while also providing an enormous area for advertising. They are typically larger than other displays and should be constructed using high quality fabrics.
